-
This split reed creel is a traditional and stylish accessory for fly fishing enthusiasts. It exudes a sense of nostalgia with its vintage design. The wicker basket and nylon strap provide a durable way to carry fishing essentials while out on the water. It has leather style accents for the hinges and buckle. There is age related wear. Measurement: 8”H x 14.5”W. [DB] 7 / 917 -
This split reed creel is a traditional and stylish accessory for fly fishing enthusiasts. It exudes a sense of nostalgia with its vintage design. The wicker basket and nylon strap provide a durable way to carry fishing essentials while out on the water. It has leather style accents for the hinges and buckle. There is age related wear. Measurement: 8”H x 14.5”W. [DB] 8 / 917 -
This split reed creel is a traditional and stylish accessory for fly fishing enthusiasts. It exudes a sense of nostalgia with its vintage design. The wicker basket and nylon strap provide a durable way to carry fishing essentials while out on the water. It has leather style accents for the hinges and buckle. There is age related wear. Measurement: 8”H x 14.5”W. [DB] 9 / 917 -
This split reed creel is a traditional and stylish accessory for fly fishing enthusiasts. It exudes a sense of nostalgia with its vintage design. The wicker basket and nylon strap provide a durable way to carry fishing essentials while out on the water. It has leather style accents for the hinges and buckle. There is age related wear. Measurement: 8”H x 14.5”W. [DB] 10 / 917 -
This includes a decanter with stopper, and five matching glasses. The set features the “deer and castle” pattern, in the manner of Friedrich Egermann. This iconic European glassware was most likely produced in the Czech Republic (formerly Czechoslovakia), in the mid 20th century. No obvious chips or cracks. Measurement: 14.25”H (decanter); 4.5”H (glasses, each). [HR] 25 / 917 -
This includes a decanter with stopper, and five matching glasses. The set features the “deer and castle” pattern, in the manner of Friedrich Egermann. This iconic European glassware was most likely produced in the Czech Republic (formerly Czechoslovakia), in the mid 20th century. No obvious chips or cracks. Measurement: 14.25”H (decanter); 4.5”H (glasses, each). [HR] 26 / 917 -
This includes a decanter with stopper, and five matching glasses. The set features the “deer and castle” pattern, in the manner of Friedrich Egermann. This iconic European glassware was most likely produced in the Czech Republic (formerly Czechoslovakia), in the mid 20th century. No obvious chips or cracks. Measurement: 14.25”H (decanter); 4.5”H (glasses, each). [HR] 27 / 917 -
This includes a decanter with stopper, and five matching glasses. The set features the “deer and castle” pattern, in the manner of Friedrich Egermann. This iconic European glassware was most likely produced in the Czech Republic (formerly Czechoslovakia), in the mid 20th century. No obvious chips or cracks. Measurement: 14.25”H (decanter); 4.5”H (glasses, each). [HR] 28 / 917 -
This neat little rifle fires .22 caliber short, long, and long rifle cartridges. It is a bolt action single shot. These rifles were produced between 1899 and 1900. The rifle has age related wear, with some pitting on the barrel. The barrel length is 18 inches. The overall length is 33.25 inches. There is no visible serial number. Not tested. [PS] 33 / 917 -
This neat little rifle fires .22 caliber short, long, and long rifle cartridges. It is a bolt action single shot. These rifles were produced between 1899 and 1900. The rifle has age related wear, with some pitting on the barrel. The barrel length is 18 inches. The overall length is 33.25 inches. There is no visible serial number. Not tested. [PS] 34 / 917 -
This neat little rifle fires .22 caliber short, long, and long rifle cartridges. It is a bolt action single shot. These rifles were produced between 1899 and 1900. The rifle has age related wear, with some pitting on the barrel. The barrel length is 18 inches. The overall length is 33.25 inches. There is no visible serial number. Not tested. [PS] 35 / 917 -
This neat little rifle fires .22 caliber short, long, and long rifle cartridges. It is a bolt action single shot. These rifles were produced between 1899 and 1900. The rifle has age related wear, with some pitting on the barrel. The barrel length is 18 inches. The overall length is 33.25 inches. There is no visible serial number. Not tested. [PS] 36 / 917 -
This neat little rifle fires .22 caliber short, long, and long rifle cartridges. It is a bolt action single shot. These rifles were produced between 1899 and 1900. The rifle has age related wear, with some pitting on the barrel. The barrel length is 18 inches. The overall length is 33.25 inches. There is no visible serial number. Not tested. [PS] 37 / 917 -
This neat little rifle fires .22 caliber short, long, and long rifle cartridges. It is a bolt action single shot. These rifles were produced between 1899 and 1900. The rifle has age related wear, with some pitting on the barrel. The barrel length is 18 inches. The overall length is 33.25 inches. There is no visible serial number. Not tested. [PS] 38 / 917 -
This neat little rifle fires .22 caliber short, long, and long rifle cartridges. It is a bolt action single shot. These rifles were produced between 1899 and 1900. The rifle has age related wear, with some pitting on the barrel. The barrel length is 18 inches. The overall length is 33.25 inches. There is no visible serial number. Not tested. [PS] 39 / 917 -
This is a side by side hammer gun, with double triggers. It is believed to be a 12-gauge. There are some markings under the foregrip, which are pictured. The overall length is 49 inches. There is age related wear, including pitting. One of the hammers is loose and missing the screw. There is an illegible number stamped into the underside of the barrel, which may or may not be a serial number. The “ELG” proof mark is also stamped into the underside of the barrel. Not tested. [PS] 40 / 917 -
This is a side by side hammer gun, with double triggers. It is believed to be a 12-gauge. There are some markings under the foregrip, which are pictured. The overall length is 49 inches. There is age related wear, including pitting. One of the hammers is loose and missing the screw. There is an illegible number stamped into the underside of the barrel, which may or may not be a serial number. The “ELG” proof mark is also stamped into the underside of the barrel. Not tested. [PS] 41 / 917 -
This is a side by side hammer gun, with double triggers. It is believed to be a 12-gauge. There are some markings under the foregrip, which are pictured. The overall length is 49 inches. There is age related wear, including pitting. One of the hammers is loose and missing the screw. There is an illegible number stamped into the underside of the barrel, which may or may not be a serial number. The “ELG” proof mark is also stamped into the underside of the barrel. Not tested. [PS] 42 / 917 -
This is a side by side hammer gun, with double triggers. It is believed to be a 12-gauge. There are some markings under the foregrip, which are pictured. The overall length is 49 inches. There is age related wear, including pitting. One of the hammers is loose and missing the screw. There is an illegible number stamped into the underside of the barrel, which may or may not be a serial number. The “ELG” proof mark is also stamped into the underside of the barrel. Not tested. [PS] 43 / 917 -
This is a side by side hammer gun, with double triggers. It is believed to be a 12-gauge. There are some markings under the foregrip, which are pictured. The overall length is 49 inches. There is age related wear, including pitting. One of the hammers is loose and missing the screw. There is an illegible number stamped into the underside of the barrel, which may or may not be a serial number. The “ELG” proof mark is also stamped into the underside of the barrel. Not tested. [PS] 44 / 917 -
This is a side by side hammer gun, with double triggers. It is believed to be a 12-gauge. There are some markings under the foregrip, which are pictured. The overall length is 49 inches. There is age related wear, including pitting. One of the hammers is loose and missing the screw. There is an illegible number stamped into the underside of the barrel, which may or may not be a serial number. The “ELG” proof mark is also stamped into the underside of the barrel. Not tested. [PS] 45 / 917 -
This is a side by side hammer gun, with double triggers. It is believed to be a 12-gauge. There are some markings under the foregrip, which are pictured. The overall length is 49 inches. There is age related wear, including pitting. One of the hammers is loose and missing the screw. There is an illegible number stamped into the underside of the barrel, which may or may not be a serial number. The “ELG” proof mark is also stamped into the underside of the barrel. Not tested. [PS] 46 / 917 -
This is a side by side hammer gun, with double triggers. It is believed to be a 12-gauge. There are some markings under the foregrip, which are pictured. The overall length is 49 inches. There is age related wear, including pitting. One of the hammers is loose and missing the screw. There is an illegible number stamped into the underside of the barrel, which may or may not be a serial number. The “ELG” proof mark is also stamped into the underside of the barrel. Not tested. [PS] 47 / 917 -
This is a side by side hammer gun, with double triggers. It is believed to be a 12-gauge. There are some markings under the foregrip, which are pictured. The overall length is 49 inches. There is age related wear, including pitting. One of the hammers is loose and missing the screw. There is an illegible number stamped into the underside of the barrel, which may or may not be a serial number. The “ELG” proof mark is also stamped into the underside of the barrel. Not tested. [PS] 48 / 917 -
This is a side by side hammer gun, with double triggers. It is believed to be a 12-gauge. There are some markings under the foregrip, which are pictured. The overall length is 49 inches. There is age related wear, including pitting. One of the hammers is loose and missing the screw. There is an illegible number stamped into the underside of the barrel, which may or may not be a serial number. The “ELG” proof mark is also stamped into the underside of the barrel. Not tested. [PS] 49 / 917 -
This kerosene lantern was designed for use on early 20th century wagons, carriages, and mining carts. It features a clear main globe, a rear-facing red “bullseye” lens, and a side mounted clamp or bracket to attach to a wagon. This lantern appears to be complete. There is age related wear. Measurement: 12”H. [MC] 50 / 917 -
This kerosene lantern was designed for use on early 20th century wagons, carriages, and mining carts. It features a clear main globe, a rear-facing red “bullseye” lens, and a side mounted clamp or bracket to attach to a wagon. This lantern appears to be complete. There is age related wear. Measurement: 12”H. [MC] 51 / 917 -
This kerosene lantern was designed for use on early 20th century wagons, carriages, and mining carts. It features a clear main globe, a rear-facing red “bullseye” lens, and a side mounted clamp or bracket to attach to a wagon. This lantern appears to be complete. There is age related wear. Measurement: 12”H. [MC] 52 / 917 -
This kerosene lantern was designed for use on early 20th century wagons, carriages, and mining carts. It features a clear main globe, a rear-facing red “bullseye” lens, and a side mounted clamp or bracket to attach to a wagon. This lantern appears to be complete. There is age related wear. Measurement: 12”H. [MC] 53 / 917
Photos 1 - 100 of 917
Per page: