Five Industrial Commercial Sewing Machines - 1. JUKI US Blind Stitch Machine Corp Model 1118-2 with full motor and table. It looks to be in excellent condition. Exclusively designed for alteration departments that must handle dress and coat hems, trouser-cuffs, drapes and all types of material from the sheerest synthetics to heavy woolens with a minimum of machine adjustment. Requires little experience to operate 1 to 1 or 2 to 1 skip stitch. Swing away work plate. Built to last and used with care in the workroom of a master tailor! DRYCLEANERS, DRESSMAKERS, ALTERATION WORKROOMS AND THREAD TRIMMER GENERAL USE Asking $450 2. Industrial Singer 241-12 AH 508296 - The 241-12 is a medium-duty machine with 5/16 presser foot lift so 1/4 inch is about the best you can expect it to sew. This is a factory machine designed for sewing denim and other heavys. The -13 was a little heavier with a little higher lift but the -12 is good. Note the pressure feed system. This machine was rated at about 4000 spm all day and could very well be set up to do that.  Comes with Table. $350 3. Industrial Elliot Sewing Machine Co., A-3DW-1 Merrow Serial 8258 Serger - Emblem/Patch Edge Comes with Table Circa 1943. $325 4. JUKI MO 804 Super Speed Single Needle Over Edging Industrial machine. $350 5. Industrial Singer 241-11. Circa 1947 without a table. $175